HeartStart MRx

Monitor/Defibrillator for emergency care

Find lignende produkter

Rugged, reliable, and easy-to-use, the HeartStart MRx with the DXL 12-Lead ECG algorithm, provides industry-leading patient monitoring capabilities, exceptional diagnostic measurements, proven resuscitation therapies, and CPR guidance.

Features
Built to endure, designed to evolve
Built to endure, designed to evolve

Built to endure, designed to evolve

The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.

Built to endure, designed to evolve

Built to endure, designed to evolve
The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.

Built to endure, designed to evolve

The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.
Click here for more information
Built to endure, designed to evolve
Built to endure, designed to evolve

Built to endure, designed to evolve

The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.
Rich clinical information, driving patient care

Rich clinical information, driving patient care

With the DXL 12-Lead ECG algorithm, the HeartStart MRx gives advanced STEMI decision support. There are predictive tools that show the probability that the patient is experiencing acute ischemia or the likely outcome of AMI. These tools help you make confident decisions to speed triage.

Rich clinical information, driving patient care

With the DXL 12-Lead ECG algorithm, the HeartStart MRx gives advanced STEMI decision support. There are predictive tools that show the probability that the patient is experiencing acute ischemia or the likely outcome of AMI. These tools help you make confident decisions to speed triage.

Rich clinical information, driving patient care

With the DXL 12-Lead ECG algorithm, the HeartStart MRx gives advanced STEMI decision support. There are predictive tools that show the probability that the patient is experiencing acute ischemia or the likely outcome of AMI. These tools help you make confident decisions to speed triage.
  • Built to endure, designed to evolve
  • Rich clinical information, driving patient care
See all features
Built to endure, designed to evolve
Built to endure, designed to evolve

Built to endure, designed to evolve

The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.

Built to endure, designed to evolve

Built to endure, designed to evolve
The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.

Built to endure, designed to evolve

The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.
Click here for more information
Built to endure, designed to evolve
Built to endure, designed to evolve

Built to endure, designed to evolve

The HeartStart MRx is built tough—tough enough to endure environmental conditions created by water, vibrations, mechanical shocks, drops, and electromagnetic activity. Plus it’s built on a scalable platform, so you can upgrade easily and take advantage of Philips advancements while retaining the same footprint and weight.
Rich clinical information, driving patient care

Rich clinical information, driving patient care

With the DXL 12-Lead ECG algorithm, the HeartStart MRx gives advanced STEMI decision support. There are predictive tools that show the probability that the patient is experiencing acute ischemia or the likely outcome of AMI. These tools help you make confident decisions to speed triage.

Rich clinical information, driving patient care

With the DXL 12-Lead ECG algorithm, the HeartStart MRx gives advanced STEMI decision support. There are predictive tools that show the probability that the patient is experiencing acute ischemia or the likely outcome of AMI. These tools help you make confident decisions to speed triage.

Rich clinical information, driving patient care

With the DXL 12-Lead ECG algorithm, the HeartStart MRx gives advanced STEMI decision support. There are predictive tools that show the probability that the patient is experiencing acute ischemia or the likely outcome of AMI. These tools help you make confident decisions to speed triage.

Specifikationer

Display
Display
Dimensions
  • 8.4’’ diagonal (128 mm x 171 mm) "/ mm
Type
  • TFT color LCD
Resolution
  • 480 x 640 pixels (VGA)
Wave Viewing Time
  • 5 seconds (ECG) seconds
Environmental & physical requirements
Environmental & physical requirements
Solids/Water resistance
  • IP24
Operating temperature
  • 0º - 45º C (32º - 113º F) ° C/° F
Storage temperature
  • -20 - 70º C (-4º - 158º F) ° C/° F
Operating humidity
  • 0% to 95% relative %
Operating altitude
  • 0 to 15000 ft (0 to 4500 m) ft/ m
Storage altitude
  • 0 to 15000 ft (0 to 4500 m) ft/ m
Mechanical shock
  • Bump: IEC 68-2-29
  • Freefall: IEC 68-2-32
Operating vibration
  • MIL STD 810E 514.4 Category 6 Helicopter
General storage vibration
  • UH60 Non-Operating: IEC 68-2-6 Swept Sine Vibration and IEC 68-2-64 Random Vibration
Safety
  • Meets EN 60601-1, UL 2601-1/CSA C22.2 No. 601-1
Defibrillation
Defibrillation
Waveform
  • Truncated Exponential Biphasic.Waveform parameters adjusted as a function of patient impedance.
Output Energy
  • Manual (selected): 1-10/15/20/30/50/70/100/120/150/170/200 Joules into a 50 Ohm load AED Mode (single energy output): 150 Joules into a 50 ohm load. Joules/Ohm
Charge Time
  • Less than 5 seconds to 200 Joules with a new/ fully charged lithium ion battery at 25º C
Shock Delivery
  • Via multifunction defib electrode pads or paddles
Shock-to-Shock Cycle Time
  • Typically less than 20 seconds
Maximum Patient Impedance Range
  • 180 Ohm Ohm
Minimum Patient Impedance Range
  • 180 Ohm Ohm
AED Mode
  • Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines
Noninvasive Blood Pressure
Noninvasive Blood Pressure
Pressure Range(a)
  • Systolic: 40 to 260 mmHg
Pressure Range(b)
  • Diastolic: 20 to 200 mmHg
Initial Pressure
  • Adult: 160 mmHg and Pediatric: 120 mmHg
Maximum Pressure
  • 280 mmHg
Alarm Range(d)
  • Systolic high limit: 30 - 270 (Adult) and 35 - 180 (Pediatric)
Alarm Range(e)
  • Systolic low limit: 30 - 265 (Adult) and 30 - 175 (Pediatric)
Alarm Range(f)
  • Diastolic high limit: 18 - 240 (Adult) and 18 - 150 (Pediatric)
Alarm Range(g)
  • Diastolic low limit: 10 - 240 (Adult) and 10 - 145 (Pediatric)
Strip Chart Recorder
Strip Chart Recorder
Recorder(a)
  • Standard: 50 mm (paper width) thermal array printer mm
Recorder(b)
  • Optional: 75 mm (paper width) thermal array printer mm
Continuous ECG Strip
  • Prints primary ECG lead with event annotations and measurements in real-time or with 10-second delay
Auto Printing
  • Recorder can be configured to print marked events/charge/ shock and alarms
Reports
  • Event Summary, 12-Lead/Operational Check/ Configuration/Status Log and Device Information
Paper Size
  • 1.97” (50 mm) W by 100 ft. (30 m) L and 2.95” (75 mm) W by 100 ft. (30 m) L "/ft/mm/m
SpO2 pulse oximetry
SpO2 pulse oximetry
Range
  • 0 to 100 %
Resolution
  • 0.01 %
Alarm Range(a)
  • Low Limit: 50 to 99% (Adult/Pediatric) %
Alarm Range(b)
  • High Limit: 51 to 100% (Adult/Pediatric) %
Alarm Delay
  • 10 s
CPR feedback and measurement
CPR feedback and measurement
Compression Depth
  • Target: -1.50 to -2.00" (-38 to -51 mm) "/ mm
Compression Rate
  • Target: 90 to 120 cpm cpm
Ventilation Volume
  • Graphic indicator: empty/one-third full/two-thirds full/full
Ventilation Rate(a)
  • Target for breaths delivered before 60 seconds since last compression: 6 to 16 vpm seconds/vpm
Ventilation Rate(b)
  • Target for breaths delivered beyond 60 seconds since last compression: 9 to 16 vpm seconds/vpm
Display
Display
Dimensions
  • 8.4’’ diagonal (128 mm x 171 mm) "/ mm
Type
  • TFT color LCD
Environmental & physical requirements
Environmental & physical requirements
Solids/Water resistance
  • IP24
Operating temperature
  • 0º - 45º C (32º - 113º F) ° C/° F
See all specifications
Display
Display
Dimensions
  • 8.4’’ diagonal (128 mm x 171 mm) "/ mm
Type
  • TFT color LCD
Resolution
  • 480 x 640 pixels (VGA)
Wave Viewing Time
  • 5 seconds (ECG) seconds
Environmental & physical requirements
Environmental & physical requirements
Solids/Water resistance
  • IP24
Operating temperature
  • 0º - 45º C (32º - 113º F) ° C/° F
Storage temperature
  • -20 - 70º C (-4º - 158º F) ° C/° F
Operating humidity
  • 0% to 95% relative %
Operating altitude
  • 0 to 15000 ft (0 to 4500 m) ft/ m
Storage altitude
  • 0 to 15000 ft (0 to 4500 m) ft/ m
Mechanical shock
  • Bump: IEC 68-2-29
  • Freefall: IEC 68-2-32
Operating vibration
  • MIL STD 810E 514.4 Category 6 Helicopter
General storage vibration
  • UH60 Non-Operating: IEC 68-2-6 Swept Sine Vibration and IEC 68-2-64 Random Vibration
Safety
  • Meets EN 60601-1, UL 2601-1/CSA C22.2 No. 601-1
Defibrillation
Defibrillation
Waveform
  • Truncated Exponential Biphasic.Waveform parameters adjusted as a function of patient impedance.
Output Energy
  • Manual (selected): 1-10/15/20/30/50/70/100/120/150/170/200 Joules into a 50 Ohm load AED Mode (single energy output): 150 Joules into a 50 ohm load. Joules/Ohm
Charge Time
  • Less than 5 seconds to 200 Joules with a new/ fully charged lithium ion battery at 25º C
Shock Delivery
  • Via multifunction defib electrode pads or paddles
Shock-to-Shock Cycle Time
  • Typically less than 20 seconds
Maximum Patient Impedance Range
  • 180 Ohm Ohm
Minimum Patient Impedance Range
  • 180 Ohm Ohm
AED Mode
  • Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines
Noninvasive Blood Pressure
Noninvasive Blood Pressure
Pressure Range(a)
  • Systolic: 40 to 260 mmHg
Pressure Range(b)
  • Diastolic: 20 to 200 mmHg
Initial Pressure
  • Adult: 160 mmHg and Pediatric: 120 mmHg
Maximum Pressure
  • 280 mmHg
Alarm Range(d)
  • Systolic high limit: 30 - 270 (Adult) and 35 - 180 (Pediatric)
Alarm Range(e)
  • Systolic low limit: 30 - 265 (Adult) and 30 - 175 (Pediatric)
Alarm Range(f)
  • Diastolic high limit: 18 - 240 (Adult) and 18 - 150 (Pediatric)
Alarm Range(g)
  • Diastolic low limit: 10 - 240 (Adult) and 10 - 145 (Pediatric)
Strip Chart Recorder
Strip Chart Recorder
Recorder(a)
  • Standard: 50 mm (paper width) thermal array printer mm
Recorder(b)
  • Optional: 75 mm (paper width) thermal array printer mm
Continuous ECG Strip
  • Prints primary ECG lead with event annotations and measurements in real-time or with 10-second delay
Auto Printing
  • Recorder can be configured to print marked events/charge/ shock and alarms
Reports
  • Event Summary, 12-Lead/Operational Check/ Configuration/Status Log and Device Information
Paper Size
  • 1.97” (50 mm) W by 100 ft. (30 m) L and 2.95” (75 mm) W by 100 ft. (30 m) L "/ft/mm/m
SpO2 pulse oximetry
SpO2 pulse oximetry
Range
  • 0 to 100 %
Resolution
  • 0.01 %
Alarm Range(a)
  • Low Limit: 50 to 99% (Adult/Pediatric) %
Alarm Range(b)
  • High Limit: 51 to 100% (Adult/Pediatric) %
Alarm Delay
  • 10 s
CPR feedback and measurement
CPR feedback and measurement
Compression Depth
  • Target: -1.50 to -2.00" (-38 to -51 mm) "/ mm
Compression Rate
  • Target: 90 to 120 cpm cpm
Ventilation Volume
  • Graphic indicator: empty/one-third full/two-thirds full/full
Ventilation Rate(a)
  • Target for breaths delivered before 60 seconds since last compression: 6 to 16 vpm seconds/vpm
Ventilation Rate(b)
  • Target for breaths delivered beyond 60 seconds since last compression: 9 to 16 vpm seconds/vpm

You are about to visit a Philips global content page

Continue

You are about to visit the Philips USA website.

Jeg forstår

You are about to visit a Philips global content page

Continue

You are about to visit the Philips USA website.

Jeg forstår

Vores websted vises bedst med den nyeste version af Microsoft Edge, Google Chrome eller Firefox.